EPEVER Photo voltaic Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Cost Controller can be a hugely successful solar controller made for off-grid solar devices. Depending on multiphase synchronous rectification engineering, it makes sure optimized Power conversion and program security for a wide array of photovoltaic (PV) purposes.
Important Characteristics of the EPEVER Tracer AN Series Controller
The Tracer AN series makes use of EPEVER Photo voltaic Charge Controller engineering for remarkable photo voltaic Vitality harvesting. Crucial characteristics include:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
Superior MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery daily life.
Liquid crystal display Show with authentic-time facts monitoring.
Several Load Regulate Modes which includes guide and timer.
Comprehensive Electronic Protections from overcharging, about-discharging, brief circuits, and reverse polarity.
Step-by-Step Guide to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Getting ready the Controller
Make sure all parts are involved: Tracer AN unit, temperature sensor, communication cables, and person manual.
Validate the design selection and voltage ratings match your photo voltaic panel and battery technical specs.
2. Mounting the Charge Controller
Pick out a very well-ventilated, dry site near to the battery bank.
Protected the Tracer AN controller using the provided mounting brackets.
Retain proper clearance for warmth dissipation.
3. Wiring the Photo voltaic Cost Controller
Warning: Normally comply with suitable security protocols and make sure the system is powered off ahead of connecting parts.
Action 1: Connect the battery terminals into the charge controller (constructive to optimistic, adverse to damaging).
Move 2: Join the photo voltaic panel array on the PV input terminals.
Phase 3: Join the load terminals if utilizing a More info direct load relationship.
Phase 4: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power on the controller by connecting the battery first.
Utilize the LCD Screen to navigate the settings menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, light-weight Handle.
five. Monitoring and Details Logging
The Tracer AN Sequence supports serious-time checking utilizing the MT50 remote meter.
Data is often logged through the RS485 interaction port employing computer software such as Photo voltaic Station PC.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Frequent Issues
Situation 1: No Electric power Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Modify procedure parameters if needed.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options during the menu.
Advantages of the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification technological innovation ensures:
Increased Performance: Lowered Power losses for the duration of conversion.
Improved Dependability: Steady performance less than variable hundreds.
Longer Battery Existence: Steady and accurate charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification engineering can be an Extraordinary option for optimizing solar power generation and extending battery daily life. By following the above setup manual, users can ensure highest effectiveness and program longevity.